Message

Cause of Error

Correction

(102)

Format error

Error message in program editor.

There is a format error in the program line marked by the cursor.

A code was used in the program which is not supported by the EIA converter.

This error can also occur when data is entered in an EIA format if the EIA Format option is not enabled.

Correct error or exit editor with SHIFT + PAGE.

The EIA translation file on the system disk might be damaged.

If the system add-on is present: Use a copy of the system disk and inform ESAB service.

The translation file of the EIA format is named EIAWDL.BIN.